Serving Atlanta Metro Area & Surrounding Georgia Communities
770-874-0402
Fire Sprinkler Inspections, Repairs & Maintenance
Your fire sprinkler system is your first line of defense against a structure fire. Titan Life Safety provides thorough NFPA 25-compliant inspections, testing, and repairs to keep your system ready when it matters most.
NFPA 25 Compliant
All inspections meet current NFPA 25 standards
Detailed Reports
Digital inspection reports for your records and AHJ
Flexible Scheduling
Quarterly, semi-annual, and annual service plans
Repairs & Maintenance
Same-company repairs — no need to call a second contractor
NFPA 25 governs the inspection, testing, and maintenance of all water-based fire protection systems.
Non-compliance can void your insurance and result in AHJ violations.Required Inspection Schedule
NFPA 25 mandates specific inspection frequencies depending on your system type. Titan Life Safety keeps you on schedule and fully documented.
Weekly
- Control valve position check
- Fire pump operation (if applicable)
- Gauges and alarm valves visual check
Monthly
- Sprinkler heads visual inspection
- Pipe hangers and supports
- Waterflow alarm devices
Quarterly
- Waterflow alarm test
- Supervisory signal devices
- Control valve operation
- Gauges calibration check
Annual
- Sprinkler heads inspection (in areas not inspected quarterly)
- Pipe and fittings inspection
- Hangers and seismic bracing inspection
- Alarm devices inspection
- Hydraulic nameplate verification
- Main drain flow test
- Backflow preventer test (if part of system)
- Gauges replaced or calibrated (every 5 years)
- Dry-pipe valve trip test (full trip every 3 years)
- Antifreeze solution concentration test
- Obstruction investigation (every 5 years or as triggered)
- Complete system documentation and deficiency report
All Sprinkler System Types
Wet Pipe Systems
The most common type — pipes are always filled with pressurized water, ready to discharge immediately when a head activates.
Dry Pipe Systems
Pipes are filled with pressurized air or nitrogen. Used in unheated spaces where water could freeze. Water releases when air pressure drops.
Pre-Action Systems
Require two triggers before water flows — ideal for data centers, museums, and areas where accidental discharge would cause significant damage.
Deluge Systems
All heads are open and discharge simultaneously when triggered. Used in high-hazard areas like aircraft hangars and chemical storage.
Antifreeze Systems
Wet pipe systems with antifreeze solution in portions exposed to freezing temperatures. Require annual concentration testing.
Common Sprinkler System Issues
Our inspectors are trained to identify problems before they become failures. Here's what we commonly find and correct.
Corroded or Damaged Heads
Sprinkler heads can corrode over time, reducing reliability. We identify and replace compromised heads before they fail.
Obstructed Sprinklers
Storage, shelving, or equipment placed too close to sprinkler heads can block coverage. We identify clearance violations.
Pipe Leaks & Corrosion
Internal pipe corrosion is a leading cause of system failure. Our inspections include obstruction investigation per NFPA 25.
Frozen or Dry Pipe Issues
Dry-pipe and pre-action systems require special attention in cold climates. We test trip mechanisms and air pressure integrity.
Improper Modifications
Unauthorized changes to sprinkler systems are a common compliance violation. We identify and document any non-conforming work.
Valve Control Issues
Closed or partially closed control valves are a top cause of sprinkler system failure during a fire. We verify all valves are in the correct position.
What to Expect From Your Inspection
Our inspectors arrive on time, work efficiently to minimize disruption to your operations, and provide a complete written report the same day. All findings are documented with photos and referenced to the applicable NFPA 25 section.
Schedule & Confirm
We confirm your appointment, system type, and any special access requirements in advance.
On-Site Inspection
Our technician performs a thorough inspection per NFPA 25, testing all required components for your system type and frequency.
Same-Day Report
You receive a detailed digital report documenting all findings, deficiencies, and recommended corrections.
Repairs If Needed
If deficiencies are found, we can perform repairs directly — no need to coordinate a second contractor.
Schedule Your Fire Sprinkler Inspection
Stay compliant with NFPA 25 and protect your property. Call us or request a service appointment online.